Browse all practice questions for the CNC Threading and Machining Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

CNC Threading and Machining Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What can operators do to ensure a straight cut during parting off operations on the lathe?
  • Which set of terms states that Z, Y, and X form right angles with each other?
  • The V-shaped form tool used in threading has what standard cutting edge angle?
  • How much material should be left on the workpiece for reaming a hole to its finished size?
  • Engine lathe setup includes which of the following components?
  • When planning drilling operations, which factor is critical because it influences subsequent holemaking steps?
  • Which statement correctly identifies early NC machine control?
  • What is the maximum length of workpiece that can be mounted on a particular lathe?
  • What is the term for the series of movements made by a single cutting tool?
  • Which are common methods of inputting information into CNC machines?
  • To improve surface finish for a grooving operation on the lathe, which adjustment is most effective?
  • Which of the following is an advantage of CNC systems?
  • Which is the most basic of the manual lathes?
  • Which term refers to software that helps to generate a part program?
  • Which lathe component has a graduated rule for measuring the movement of a cutting tool into a workpiece?
  • Turning operations that remove large amounts of material typically use which setting on the engine lathe?
  • Which code describes the operations a machine should perform in a part program?
  • A numerical value that repositions a tool to adjust for any variety of factors describes which CNC concept?
  • Which standard allows CAD/CAM data to be exchanged between systems in different countries?
  • Which holemaking operation uses a multi-point tool to machine a hole?
  • Which line type is used to show the visible boundary of an object in a blueprint?
  • Which term communicates the location for tool movement along an axis to a CNC machine?
  • Where is the gage line located on a CNC mill?
  • Which device is used to input data in a CNC system?
  • Which feedback device uses light to track the rotation of the ballscrew?
  • Which blueprint element conveys the size information for features on the drawing?
  • During CNC machining, which parts are the primary moving elements?
  • What term describes the last measurement value recorded on a dial caliper?
  • The phrase 'Indication of feature importance in a blueprint' refers to providing what kind of information about the part?
  • Component of a CNC mill that reads part programs to direct machine movements.
  • Which term communicates the feed rate of a cutting operation in a part program?
  • If the cross slide's axial movement equals the cross-slide feed dial setting, what is the resulting feed ratio?
  • Before operating an engine lathe, what is the essential preparatory step the machinist must perform?
  • CAM stands for which concept?
  • Which control system uses a feedback device to verify motion?
  • Which carriage control is used to adjust tool travel perpendicular to the workpiece axis?
  • Semi-automatic tool compensation is a CNC feature for what?
  • Which elements are stresses, strains, heat distribution, and tolerances?
  • Reading the vernier scale on a micrometer is associated with which property in the material?
  • Which function in CAD/CAM is used to organize manufacturing steps into routings and documents?
  • In thread geometry, which measurement is used to describe the outer boundary of the external thread?
  • Which activity helps a technician improve accuracy when using measuring instruments?
  • Which ID operation is used to create a smooth finish on a workpiece interior?
  • What is the primary difference between a horizontal CNC mill and a vertical CNC mill?
  • Which type of line is indicated in the drawing?
  • Which operation is performed to produce a smooth interior bore after drilling?
  • Type of milling cutter that is flat with cutting teeth surrounding the tool.
  • How is the accuracy rating of NIST gage blocks described in the material?
  • What does a thread micrometer measure?
  • Which engine lathe component moves side to side along the ways?
  • Which OD operation cuts material from the end of a workpiece?
  • Which concept allows any CNC machine to receive the same information from different CAM software programs?
  • Which operation performed on the lathe is an inner diameter (ID) operation?
  • Which type of cutter is flat with cutting teeth surrounding the tool?
  • What is the difference between an auxiliary and a section view?
  • In a 3D Cartesian system, what is the name of the point where X, Y, and Z axes intersect?
  • What code specifies machine-level actions such as tool changes and spindle control in a part program?
  • What engine lathe workholding device uses split, tapered sleeves to grip a workpiece?
  • The difference between a measurement reading and the actual dimension is called?
  • Which term specifies one of a varied assortment of instructions in a part program?
  • In an engine lathe setup, which component is primarily used to position the tool and workpiece before turning?
  • Which term describes the standards that dictate the language used by CNC machines and part programs?
  • Which machine is designed primarily for turning operations producing cylindrical shapes?
  • Describes up-and-down movement?
  • Which term describes a machine that integrates multiple machining operations with automatic tool changes controlled by NC?
  • Which axis is typically aligned parallel to the spindle on many CNC milling setups?
  • Which CNC mill component supports and moves the workpiece?
  • What results from positioning the cutting tool tip below the centerline for facing operations?
  • During internal threading, what should the operator do once the required threaded length in the hole is reached?
  • When turning between centers, which tailstock accessory is typically used?
  • In a CAD/CAM system, CAD/CAM data is stored in a storage medium known as what?
  • Which interface is commonly used to input data and control parameters on a CNC system?
  • Which of the following statements about dimensions on a blueprint is true?
  • Which small dimension value is listed as 0.000001 in. in the material?
  • What type of view presents two-dimensional drawings of each side of a part?
  • What type of CNC machine brings tools into contact with a rotating workpiece?
  • Which cutting tool can be indexed to reveal a fresh cutting edge?
  • Which term refers to the translation format used for CAD data interchange?
  • Which machine type changes axis directions due to the worktable moving rather than the cutting tool?
  • Which coordinate system categorizes positions using three perpendicular axes?
  • Which is a unit of measurement for feed rate?
  • What type of misalignment occurs when only one end of a workpiece is concentric to the spindle?
  • Which coding scheme is used to issue instructions to CNC machines in textual form?
  • What fluid application method involves a machinist using a brush to manually apply fluid?
  • Threading operations typically use a V-shaped form tool with what cutting edge angle?
  • Which operation would be used to create an internal diameter on a workpiece?
  • The forward-and-backward movement of the cross slide aligns with which axis on the engine lathe?
  • What CNC technology monitors machine functions in real time?
  • Which cutting variable remains constant during turning as the workpiece diameter decreases in size?
  • Which term indicates the location of the gage line on a CNC mill?
  • Which gauge is used to inspect external cylindrical features such as a shaft?
  • Removes a thin slice of a part and rotates it ninety degrees.
  • What type of line helps a viewer visualize an imagined slice in a part where material has been cut out?
  • All tools in the machine share the same spindle and program zero; this implies which offset-related concept?
  • What term describes the smallest unit of measurement an instrument can display?
  • For a Unified thread with depth 0.05 in and major diameter 0.90 in, what is the undercut finish diameter?
  • In CNC programming, which term designates the numeric block number at the start of a program line?
  • Which component of a part program signals the essential function of a word?
  • What is the function of a quick-change gearbox on an engine lathe?
  • Cutter radius compensation (CRC) moves a tool by affecting which aspect of the tool?
  • The full amount of time from the conception to completion of a part is called?
  • What should the programmer determine before recording the sequence of cutting operations?
  • Which statement explains why a workshift offset would be identical for all tools?
  • Which workholding device provides additional support for long workpieces?
  • Which type of cutting tool has an expensive cutting material fused to a less expensive material?
  • What type of projection is used to show multiple views of a part?
  • Prior to conventional drilling on an engine lathe, to what depth should the center drill be fed?
  • In a vernier micrometer, what is the purpose of the Vernier scale?
  • Which CAD/CAM function creates route sheets that guide and organize steps in manufacturing parts?
  • The phrase 'Provide auxiliary, non-crucial information about the part' describes which blueprint concept?
  • Which tool is used on a manual lathe to cut threads?
  • A ring gauge is typically used to inspect which part feature?
  • Which is the function of leadscrew?
  • Which is cut from a workpiece?
  • Which term is used to describe the storage medium that holds CAD/CAM data?
  • Which view is used when the true shape of a feature inclined to the principal planes is needed?
  • After setting the depth of cut, which handwheel does a machinist use to feed a turning tool along the workpiece?
  • Which device provides feedback by using light to detect rotation, typically in a mechanical system?
  • Which axis is associated with the cross slide's movement when preparing a turning operation?
  • What is a function of the toolchanger?
  • What type of readout devices appear on an engine lathe's carriage and cross-slide handwheels?
  • Which term denotes higher precision requirements in drawings?
  • Which item describes a physical drawing used to communicate specifications to fabricators?
  • The overall plan that specifies how the tool moves to produce a part is called what?
  • Which lathe feature provides extra support for long workpieces?
  • Which axis describes rotation around the X-axis?
  • Which dial is used to set the depth of cut for external threading on the engine lathe?
  • Explanation of a reference dimension
  • Which term describes moving two or more axes in a coordinated fashion to produce a continuous path?
  • Which concept refers to software that assists in automatically generating CNC programs rather than manual coding?
  • What is the formula to obtain the undercut finish diameter for a Unified thread given the major diameter D and thread depth d?
  • Indicates direction to the right and down on a vertical machining center.
  • What is the purpose of a CNC machining center?
  • What is the point where the three linear axes X, Y, and Z intersect in a Cartesian coordinate system?
  • What term describes words written in numerical data to control tool motion?
  • What does the term "machine zero" refer to in CNC machining?
  • What measurement describes a Unified thread's largest diameter?
  • Which component interprets numerical data and controls movement in CNC machines?
  • Which term describes the preparatory step of transforming a blueprint for use in CNC milling?
  • Which coordinates are used by a CNC machine tool when there is an error in the third cutting tool position?
  • Which component in a CNC milling setup provides the surface to clamp and move the workpiece?
  • For outside diameter turning on a lathe, which axis must be touched off and zeroed?
  • In an open-loop CNC control system, which component generates movement pulses to drive the axes?
  • What does a machinist use to set the direction the cutting tool moves relative to the workpiece?
  • Which handwheel does a lathe operator use to reach the finish depth during boring?
  • When finishing a hole by reaming, how much material should remain?
  • In what section of the blueprint is the general scale listed for the entire drawing?
  • Which method of applying cutting fluid involves letting the fluid drip onto the work area instead of flooding or spraying?
  • Which holemaking operation uses a multi-point tool to machine a new hole into a workpiece?
  • Indicates movements on multiple axes?
  • What is the role of tolerance in engineering fits?
  • What is the listed resolution for height gauges when using granite surface plates?
  • The development of CAD/CAM software made it possible to design and manufacture a part using what?
  • The value 0.01 in. (0.254 mm) is given for a measurement. What two units are shown?
  • Which term refers to the total time required to complete a part from start to finish?
  • Which statement about taper turning on an engine lathe is true?
  • What action is performed by running a CNC program without manufacturing a part to verify logic?
  • Which CNC machine uses force to create bends or holes in sheet metal?
  • What is the purpose of a center line on a blueprint?
  • Which spindle nose type can cause the chuck to unscrew and fly off when the spindle direction is reversed?
  • In a part program, what is the designated origin for coordinates?
  • Which cutting tool do machinists most commonly use for turning operations on an engine lathe?
  • Which statement best describes the flange on a toolholder?
  • In the Unified thread example, what does the value 0.05 in represent?
  • What determines the maximum resolution of a slide caliper?
  • Which of the following is a drawback of CNC machines?
  • Which operation would you perform to create a textured grip on a cylindrical surface?
  • To create the proper undercut diameter, how much material should be removed from the workpiece?
  • Which instrument is noted for having a maximum resolution of 0.01 in.?
  • Testing the program before part production begins.
  • Prepared based on part geometry and data in CAD is described by which term?
  • Contents of a change block typically include which of the following?
  • Which term defines the data standard named in full as the Standard for the Exchange of Product Model Data?
  • Which milling operation removes material from the workpiece using the side of the tool?
  • On a CNC machine, which axis is located parallel to the spindle?
  • Which tool type is associated with indexing to reveal a fresh edge for continued use?
  • Which diameter describes the distance between crests of an external thread?
  • The cutting tool moves vertically along which axis?
  • Which type of geometric model uses lines to represent the dimensions of a part?
  • What included angle do V-shaped symmetrical threads have?
  • Which control is used to feed the turning tool along the axis of the workpiece during turning operations?
  • What does a machinist use to manually check alignment of the tool tip to the spindle?
  • Which lathe type is typically considered the simplest form for manual turning operations?
  • Which coordinate system is a three-dimensional representation of the polar coordinate system?
  • Historically, what medium was used to input and store machining instructions for NC machines?
  • Which instrument is commonly associated with reading a vernier scale, as described in the material?
  • Starting a facing operation with a light pass helps establish what kind of surface?
  • What term describes when multiple axes move simultaneously to follow a curved or complex path?
  • Which statement best describes the center line on a blueprint?
  • For turning operations on an engine lathe, which cutting tool configuration is most commonly used?
  • Which component on a lathe is associated with moving the cutting tool into the workpiece via a screw thread?
  • When positioning axes in a CNC system, which coordinate set remains constant regardless of movement commands?
  • Which engine lathe component precisely sets the leadscrew and carriage positions relative to the workpiece?
  • For grooving on a lathe, which adjustment most improves surface finish?
  • How does an object line function in a blueprint?
  • What is the first step a machinist must complete before operating an engine lathe?
  • Which coordinate system is used to represent positions in three dimensions for polar-like mathematics?
  • Directs the tool to cut at each end position.
  • What does making a light pass to begin facing operations achieve?
  • What type of line would be used to shorten drawings for extremely long parts?
  • What cutting variable describes the rate that the cutting tool moves during one rotation of the spindle?
  • For turning operations using centers, what type of center is typically installed in the tailstock?
  • The notes reference a small dimension value of 0.000001 in. Which unit is this measurement expressed in?
  • What should a part programmer do with a blueprint before using it to create a part on a CNC mill?
  • Which data format is primarily used to program tool motion in CNC systems?
  • What device was used to store and input machining commands for the first NC machines?
  • Which toolholding option is commonly designed to hold up to four cutting tools in a single operation?
  • Which component is responsible for interpreting coded data and issuing axis movement commands?
  • What system uses axes to locate an object in three-dimensional space?
  • Which micrometer type includes a stopping plate?
  • Which code provides the reference name or title for a program block in a part program?
  • Manual drafting (drawing) of parts is considered outdated because it has been replaced by which technology?
  • Which of the following is an important factor for drilling operations?
  • In manufacturing metrology, what term describes the process used to determine whether a tool is within specification as it wears?
  • The carriage moves a lathe's cutting tool from side to side along what axis?
  • Which CNC mill workholding device has one fixed and one moveable jaw to hold simple workpieces?
  • If the major diameter is 0.90 in and the thread depth is 0.05 in, what is the undercut finish diameter?
  • What is the sequence of commands necessary to machine a part called?
  • A physical part drawing that is printed on paper is known as?
  • During lathe parting off, which component should be secured to maintain straight cuts?
  • Which programming language uses textual commands?
  • To compensate for varying tool sizes describes the purpose of which offset?
  • Which term describes the rotational movement of a workpiece around the X axis?
  • Which term refers to the Vernier scale graduation used for reading the main scale on a micrometer?
  • What term represents the full sequence of instructions that is executed by a CNC machine to manufacture a part?
  • What measurement task is a micrometer primarily used for?
  • What does using a center gage during setup for external threading operations verify?
  • Which statement best describes threading on a manual lathe?
  • Direct tool motion along three axes is a characteristic of which type of CNC system?
  • What controlled early NC machine movement?
  • The major diameter is defined as the distance between which features on an external thread?
  • What part of an NC machine transmits the instructions to the drive system and machine tool through a hard-wired electrical circuit?
  • In thread terminology, which diameter is the largest for a Unified thread?
  • Which unit describes feed rate as movement per spindle revolution?
  • To cut an internal thread that has a nominal size of 0.875 in and 10 TPI, what is the minor diameter of the hole that must be drilled?
  • What feed ratio results when the cross slide moves the tool the same distance as the cross slide feed dial?
  • Which term describes the Vernier scale graduation used for reading main-scale measurements?
  • Which toolholder holds up to four cutting tools for use in a single operation?
  • What part of a CNC system reads and executes the machining instructions in the part program?
  • Which concept describes the CNC feature for entering tool offsets?
  • Which code controls the motion mode and machine operations in a CNC program?
  • What is the purpose of the flange on a toolholder?
  • Which device does a machine operator use to set the depth of cut for turning operations?
  • What statement about blueprints is true?
  • In CAD/CAM, which feature stores part design information?
  • Which lathe part carries a graduated rule for measuring the axial movement of the tool into the workpiece?
  • Position that acts as the origin in each part program.
  • What statement about part production on a mill is true?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy